Useful tips for repairing shoes and boots with the best glue

Ordinary shoes and boots are easy to be exposed to, peeling off the glue when going to the rain, making them lose their aesthetics and you may not be able to wear them anymore. Many people will use normal glue to glue, but after a few days, it will fail again.

So using specialized glue to repair shoes and boots is the most suitable choice. Refer to the following article, you will know how to stick shoes tightly and very economically with glue for shoes and another mysterious ingredient.

When gluing shoes, add a few grains of sand to help increase the friction between the two sides of the shoe, thereby increasing the adhesion to make the shoe more adhesion.

Here are the steps you need to take to get a new shoe after repairing with the best glue for shoes & boots.

#1 Prepare

The first step, you need to prepare the necessary materials for the shoe repair process. These ingredients are very simple and you can prepare them easily.

Get some glue and some sand. Note using construction sand with small grains, avoiding large grains or gravel, especially dry sand, wet sand will reduce the bonding efficiency.

#2 Repair shoes

Step 1: Add a few grains of sand and spread evenly over the exposed sole. Do not add too much sand, it will prevent the glue from sticking well.

Step 2: Use the glue to spread evenly onto the sole.

Step 3: Use your hands to press firmly on the shoes to make the glue stick more tightly. Wait about 5 minutes for the glue to dry and the shoes can be used. Be careful not to get the glue on your hands.

Note: Super glue only applies to casual shoes and sandals. It should not be applied to footwear, leather shoes cause it can be damaged. Leather shoes and boots should be used with glue for leather.